The Bergman kernel for the Vekua equation

The paper extends some well-known results for analytic functions onto solutions of the Vekua equation $\partial \overline{{}_z}W=aW+b\overline{W}$ regarding the existence and construction of the Bergman kernel and of the corresponding Bergman projection operator.     

丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

纳米银改性树脂基托机械性能的初步研究

采用磁控溅射技术在聚甲基丙烯酸甲酯(PMMA)树脂基托表面沉积一层纳米银(Ag NPs)涂层.研究了纳米银改性PMMA树脂基托的机械性能,为改性材料的临床应用提供理论基础.根据国际标准ISO2409:2007描述的划格法对涂层与基底的附着力强度进行测试,各组试件的接触角采用静态液滴法测量,三点弯曲法检测试件的弯曲强度.结果显示,各组涂层与PMMA基底材料结合良好,各组试件的表面润湿性变化不大,其中PMMA-Ag NPs80s组疏水性略有提高,各组试件的弯曲强度均符合国家标准.     

静电纺丝法制备酚醛纤维研究进展

酚醛树脂是一种广泛使用的合成树脂,包括热固性和热塑性两类,具有良好的阻燃性、耐热性和耐腐蚀性。酚醛纤维是由酚醛树脂所制成的交联纤维,传统的酚醛纤维制备方法有熔融纺丝法和湿法纺丝法,后来出现了静电纺丝法。本文根据酚醛树脂的种类分别介绍了热固性、热塑性和热塑/热固混合酚醛树脂三类材料静电纺丝的研究进展。在改善酚醛纤维特性方面,综述了四种优化措施,包括加入无机盐、微波辐射辅助固化、非匀速阶梯式加热固化、氧化石墨烯修饰的静电纺丝法等。此外,对本实验室制备酚醛纤维的研究也进行了概述,阐述了酚醛纤维当前存在的问题及未来发展方向。     

Solid phase synthesis of two muramyl pentapeptide derivatives

Solid phase peptide synthesis (SPPS) of two selected muramyl pentapeptide derivatives is described. The simplicity of removing the protecting groups via one-step deprotection and cleavage from the resin is the biggest advantage of SPPS. Using this method, two muramyl pentapeptide derivatives, D-MurN₃-L-Ala-D-iGlu-L-Lys-D-Ala-D-Ser (5) and D-MurN₃-L-Ala-D-iGlu-L-Lys-D-Ala-D-Ala (6), were obtained. Their chemical structures were confirmed by high-resolution mass spectrometry (HRMS) and nuclear magnetic resonance (NMR) spectroscopy. To determine the absolute configuration of the carbon atom in the side chain of the muramic acid derivative, single-crystal X-ray diffraction measurements were recorded.     

New soft porous frameworks based on lambda-zirconium phosphate and aliphatic dicarboxylates: Synthesis and structural characterization

New dicarboxylate-functionalized pillared materials with a general formula of λ-ZrPO₄(OH)_1-x(OOC(CH₂)_nCOO)_x/2(dmso) (n=6, 8 and 10) have been prepared by post-synthesis modification of the inorganic layers of λ-zirconium phosphate (λ-ZrP), where the superficial Chloride monovalent anionic ligands of λ-layer are partially exchanged with the divalent anionic ligands of a series of long-chain aliphatic dicarboxylic acids, namely octanedioic acid, decanedioic acid and dodecanedioic acid. The synthesized materials are characterized by X-ray diffractometry, FT-IR spectrophotometry, elemental and thermogravimetric analyses. The X-ray diffraction patterns show that the obtained solid phases are pure. Furthermore, the interlayer distance of λ-ZrP systematically increases from 1.02 to 1.59 nm as a result of the incorporation of the mentioned acids inside the interlayer gallery.     

Thieno[3,4-c]pyrrole-4,6-dione based copolymers for high performance organic solar cells and organic field effect transistors

Donor-acceptor type copolymers have wide applications in organic field-effect transistors and organic photovoltaic devices. Thieno[3,4-c]pyrrole-4,6-dione (TPD), as an electron-withdrawing unit, has been widely used in D-A type copolymers recently. Till now, the highest power conversion efficiency and mobility of TPD-based copolymers are over 8% and 1.0 cm² V^-1 s^-1 respectively. In this review, the recent progress of TPD-based copolymers in organic solar cells and organic transistors is summarized.     

Asymmetric Total Synthesis of (−)‐Englerin A through Catalytic Diastereo‐ and Enantioselective Carbonyl Ylide Cycloaddition

An asymmetric total synthesis of the guaiane sesquiterpene (?)‐englerin A, a potent and selective inhibitor of the growth of renal cancer cell lines, was accomplished. The basis of the approach is a highly diastereo‐ and enantioselective carbonyl ylide cycloaddition with an ethyl vinyl ether dipolarophile under catalysis by dirhodium(II) tetrakis[N‐tetrachlorophthaloyl‐(S)‐tert‐leucinate], [Rh₂(S‐TCPTTL)₄], to construct the oxabicyclo[3.2.1]octane framework with concomitant introduction of the oxygen substituent at C9 on the exo‐face. Another notable feature of the synthesis is ruthenium tetraoxide‐catalyzed chemoselective oxidative conversion of C9 ethyl ether to C9 acetate.     

Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386